• Black high-performance condenser microphone with cardioid pattern

• 32mm gold-sputtered membrane

• Switchable low-pass filter and adjustable sensitivity

The Auna CM003 is a high-performance condenser microphone with cardioid polar pattern, excellent performance and quality components.

The special features include a wide frequency response, wide dynamic range and low noise floor.This results in a first-class audio signal which also positively affects the recording quality. An important reason for this is the 32mm gold-sputtered membrane that produces an audibly warm, full-bodied, low-noise sound. This sound can be adapted with a switchable low-cut filter and pad.

Among other things the delivery includes a spider stand in an elastic nylon mesh to avoid unwanted vibrations and oscillations. In addition, the device comes with a windscreen to reduce atmospheric noise such as wind and sibilance. Of course, the set also includes a 5/8" to 3/8" screw adapter for tripod mounting.

This microphone is ideal for use in a studio, at concerts as well as for broadcasting and live applications.

**Please note that all of our condenser microphones require +48v Phantom Power, which can be supplied from external audio cards, mixing consoles etc. Please check that your equipment is compatible with this item before proceeding with your purchase.*Please note that the microphone is not equipped with a USB port. For direct connection with the computer, we recommend the following item numbers: 10006514, 10006515, 10011703 und 10011711.

• Connections: 1 x XLR output
• Frequency range: 20Hz - 20kHz
• Sensitivity: 38.5 dB
• Impedance: 250 ohms
• Noise Level: 20dB (A-weighted)
• SPL: max. 125dB for 0.5% THD
• Low Cut switch
• Pad switch
• Power supply: 48V phantom power Not Included)

• Height: 19cm
• Diameter: 4.5 cm
• Weight: about 444g

Your order will be delivered to the selected address per order. This address does not have to match the billing address. You can send the orders to your family, friends or office if you are not at home during the day.Your order will be delivered by the carrier in the resquested address. This address does not have to match the billing address. Please leave a telephone number in order to guarantee the best possible delivery of your order.This item may be pre-ordered. Please note that, in this case, the delivery time may be up to 5 days.

• Professional microphone shield for practical mounting behind the microphone

• Minimises reflections, noise and room reverberation - ideal for dry voice, vocal and instrument miking

• Flexible lightweight construction with metal guide rail and grippy thumbscrews for adjusting depth and height

The microphone shield from auna Pro is the cost-effective solution for professional sound recording studios with adverse environmental conditions. With flexible ergonomics, it is ideal for live applications.

The acoustically optimised foam (5cm thick) has a high density, minimising unwanted reflections and noise while reducing the room reverb, which is especially essential for for particularly dry-sounding recordings. The flexible lightweight design can be quickly and easily mounted on conventional microphone stands or brackets using the supplied adapter.

With a depth guide rail made of metal that is adjustable in height and depth, as well as large, grippy thumbscrews, the auna Pro microphone screen can be adapted to the spatial conditions and body size in just a few steps. The back panel has metal profiles as well as a perforated aluminium plate that protects the sensitive foam from damage.

• Low weight
• Fast assembly
• Suitable for live applications
• Bolted metal profiles
• Riveted logo
• Material: metal, acoustically optimised high-density foam

• 45 x 30 x 26 cm (WxHxD)
• Foam thickness: 5 cm
• Weight: 1.6 kg

Your order will be delivered to the selected address per order. This address does not have to match the billing address. You can send the orders to your family, friends or office if you are not at home during the day.Your order will be delivered by the carrier in the resquested address. This address does not have to match the billing address. Please leave a telephone number in order to guarantee the best possible delivery of your order.This item may be pre-ordered. Please note that, in this case, the delivery time may be up to 5 days.

• Microphone stand with attachment plus bracket for microphone

• Perfect holding properties (supports up to 1.5 KG)

• Attractively simple design: black arms with silver-coloured screws and clamp

Maybe you just had a melody in your head and want to quickly record it. How easy would it be to get started, right on the window as you’re looking out over the night sky? The foldable, easy-to-use auna Pro ST-1.2 mic stand helps you quickly and easily implement your vision, wherever you want. Everywhere you go: sing your song! Living your dreams can be so easy.

Or do you want to record a podcast? Perhaps together with your friends? In your home or in a studio? Again, the auna Pro ST-1.2 microphone stand proves to be the ideal helper: quickly folded, it fits into any pocket and can be set up in just a few steps in different locations. All it needs is a table edge or shelf. When connected to the auna Pro mic stand, your microphone is in the best hands. “Quiet: recording in progress”, and then you and your friends have everything in place to record a new podcast.

It’s never been so easy to be part of the modern showbiz world! Work like a professional with the auna Pro ST-1.2 microphone stand!

• Optimal for vocal recordings, podcasts, gaming
• Stable positioning by tension springs
• Light weight for a comfortable transport
• Also suitable for mounting lights
• Clamp fastener for mounting on tabletops or shelves

• Dimensions: about 35 x 35 cm (vertical x horizontal)
• Weight: about 500 g

Shipping time: 3 - 5 days

Your order will be delivered to the selected address per order. This address does not have to match the billing address. You can send the orders to your family, friends or office if you are not at home during the day.Your order will be delivered by the carrier in the resquested address. This address does not have to match the billing address. Please leave a telephone number in order to guarantee the best possible delivery of your order.This item may be pre-ordered. Please note that, in this case, the delivery time may be up to 5 days.

• Black microphone pop shield with 16cm diameter

• Optimal positioning thanks to the 35cm flexible gooseneck

• Wide-meshed nylon cover with 2 layers

The auna Pro POP-1 pop shield reliably protects your hardware and sound recording against unwanted popping sounds which often arise through the articulation of B and P sounds. The use of anti-pop sheilds pays off just in the studio applications. The loss of height in the audio signal is relatively low thanks to the relatively meshed nylon material and has no relevant impact on the quality of the recording as a whole. The microphone pop shield can be directly mounted on the mic stand with a screw and be optimally positioned via the flexible gooseneck.

• Easy attachment to the stand
• High quality acoustic filter
• Ideal protection for hardware and audio signal
• Material: plastic, nylon, metal
• Colour: Black

• Diameter: 16cm
• Length of gooseneck: 35cm
• Weight: about 205g

Shipping time: 3 - 5 days

Your order will be delivered to the selected address per order. This address does not have to match the billing address. You can send the orders to your family, friends or office if you are not at home during the day.Your order will be delivered by the carrier in the resquested address. This address does not have to match the billing address. Please leave a telephone number in order to guarantee the best possible delivery of your order.This item may be pre-ordered. Please note that, in this case, the delivery time may be up to 5 days.