• Converter to connect XLR microphones into the USB port of your PC or Mac

• No complicated installation thanks to Plug & Play

• Adjustable volume, gain and monitoring

Make your home PC or Mac recording studio-compatible with the Auna AI-01 XLR-USB converter. Whether you want to record for your own podcast, record music or singing or record sound for your videos, the quality of the microphone is what matters the most. With the AI-01 you do not need expensive special equipment: simply connect any studio-grade XLR microphone directly into the USB port of your computer. No complicated installation is necessary. Thanks to the Plug & Play technology, the converter is detected completely automatically and you can start recording immediately.

Functionally, the XLR-USB connecter supports the processing of your audio signal with its best effort. You can directly regulate volume and gain to avoid signal overdrive while recording. An LED light in green, yellow and red provides information on peaks and clipping and lights up the adjustment of the connected microphone. Using headphones, sound recordings can be listened to and controlled directly and latency-free via live monitoring. For connecting the headphones, the converter features a 3.5mm jack output. It is also possible to listen to pre-recorded tracks via monitoring to mix with the actual live recording. Activate 48V phantom power with the press of a button, so that condenser mics can easily find a connection. The best conditions for perfect audio recordings.

The handy AI-01 XLR-USB converter from Auna fits easily in your pocket and can be attached with Velcro strips to the microphone stand. The 3m-long USB cable ensures high freedom of movement.

• Connections: 1 x XLR mic input, 1 x mini-USB output, 1 x 3.5mm jack output
• Resolution: 16 bit
• 48V phantom power
• 44.1kHz / 48kHz sampling rate
• Latency-free live mix during recording through headphones connector
• Control LEDs for clipping / peak, proper connection and phantom power
• Velcro for mounting to microphone stands etc.

• Dimensions: 15.3 x 3.3cm (LxØ)
• Length USB cable: 3m
• Weight: about 250g

Your order will be delivered to the selected address per order. This address does not have to match the billing address. You can send the orders to your family, friends or office if you are not at home during the day.Your order will be delivered by the carrier in the resquested address. This address does not have to match the billing address. Please leave a telephone number in order to guarantee the best possible delivery of your order.This item may be pre-ordered. Please note that, in this case, the delivery time may be up to 5 days.

• Professional condenser microphone

• 32mm capsule with gold membranes

• Distinctive cardioid pattern

The auna Pro CM001B Studio Microphone is a professional condenser microphone.

Thanks to its high sensitivity, low self-noise and a widefrequency response it is ideal for stage performances, as well as instrumentsand vocals.

The auna Pro professional microphone can even be used as a mediumto create your own podcasts or your own radio and broadcast productions.

The large 32mm gold membrane condenser capsule and thepronounced cardioid provide ideal conditions for studio productions, home recordingsand live recordings.

In addition, the auna Pro studio mic has an integrated low-cutfilter which can be activated by a switch hidden in the case. The power supplyis customary via 48V phantom power.

The shockmount allows the professional microphone to form abond to the microphone stand with a 5/3'' thread, which may be switched to a5/8'' sized thanks to the supplied adapter.

The robust heavy-duty brass body of the CM001B is not onlyextremely resistant to shocks and scratches; its silver coloration gives theauna Pro CM001B a timeless style component too. The transport case guarantees that therefined body will be protected from damage.

**Please note that all of our condenser microphones require +48v Phantom Power, which can be supplied from external audio cards, mixing consoles etc. Please check that your equipment is compatible with this item before proceeding with your purchase. Please be aware that the microphone does not have a USB port. For direct connections to a PC please see items 100006514, 100006515, 10011703 and 10011711 in our shop.

• Connection: 1 x XLR output
• Integrated 6dB 100Hz low-cut filter
• Frequency response: 20Hz - 20kHz
• Sensitivity: 36dB + / - 2dB
• Output impedance: 200 ohms
• Noise level: 20 dB
• Max. Gain: 125 dB for 0.5% THD
• Signal to Noise Ratio: 70 dB
• Power supply: via +48V phantom power(Not Included)

• 5 x 15 cm (ØxH)
• Weight: about 340g

Shipping time: 3 - 5 days

Your order will be delivered to the selected address per order. This address does not have to match the billing address. You can send the orders to your family, friends or office if you are not at home during the day.Your order will be delivered by the carrier in the resquested address. This address does not have to match the billing address. Please leave a telephone number in order to guarantee the best possible delivery of your order.This item may be pre-ordered. Please note that, in this case, the delivery time may be up to 5 days.

• Black microphone table stand in tripod design

• Ideal for the installation of microphones or recording devices

• Infinitely adjustable height

The auna Pro PR5-ST-4 is a practical microphone stand in tripod design. The microphone stand is height-adjustable and can be folded down to save space. Thanks to the locking screw, the stand can be precisely adjusted. Table tops and lecterns are protected from scratches thanks to the anti-slip rubber feet.

• Foldable construction
• Locking screw
• Anti-slip rubber feet for the protection of table tops
• Material: metal, plastic
• Colour: black

• Height: 12 - 19.5 cm
• Max. area: 19 x 16,5 cm (WxD)
• Weight: about 154 g

Your order will be delivered to the selected address per order. This address does not have to match the billing address. You can send the orders to your family, friends or office if you are not at home during the day.Your order will be delivered by the carrier in the resquested address. This address does not have to match the billing address. Please leave a telephone number in order to guarantee the best possible delivery of your order.This item may be pre-ordered. Please note that, in this case, the delivery time may be up to 5 days.

• Black microphone pop shield with 16cm diameter

• Optimal positioning thanks to the 35cm flexible gooseneck

• Wide-meshed nylon cover with 2 layers

The auna Pro POP-1 pop shield reliably protects your hardware and sound recording against unwanted popping sounds which often arise through the articulation of B and P sounds. The use of anti-pop sheilds pays off just in the studio applications. The loss of height in the audio signal is relatively low thanks to the relatively meshed nylon material and has no relevant impact on the quality of the recording as a whole. The microphone pop shield can be directly mounted on the mic stand with a screw and be optimally positioned via the flexible gooseneck.

• Easy attachment to the stand
• High quality acoustic filter
• Ideal protection for hardware and audio signal
• Material: plastic, nylon, metal
• Colour: Black

• Diameter: 16cm
• Length of gooseneck: 35cm
• Weight: about 205g

Shipping time: 3 - 5 days

Your order will be delivered to the selected address per order. This address does not have to match the billing address. You can send the orders to your family, friends or office if you are not at home during the day.Your order will be delivered by the carrier in the resquested address. This address does not have to match the billing address. Please leave a telephone number in order to guarantee the best possible delivery of your order.This item may be pre-ordered. Please note that, in this case, the delivery time may be up to 5 days.